Support for yourCoffee
Unexpected behaviour articles for Coffee support
- Almost empty bean container not detected
- Appliance switched off but cup rest warm
- Automatic descaling not carried out
- BaristaAssistant settings screen displayed too briefly
- Brew unit cannot be inserted
- Brew unit cannot be removed
- Brew unit difficult to remove/insert
- Brew unit handle not locking
- Cannot insert milk valve
- Cannot remove/insert waste container
- Central spout jams container
- Central spout moves down; no coffee dispensed
- CLEAN BREW UNIT not displayed
- Clean the milk pipework not starting
- Cleaning/rinsing process cut short
- Coffee flowing out above the spout
- Coffee grounds wet/coffee too weak
- Coffee machine not responding
- Coffee machine not switching on immediately
- Coffee machine switched off but rinsing
- Coffee machine switches off suddenly
- Coffee machine switching on automatically
- Coffee only dripping out of spout
- Degrease brew unit not starting
- Degree of grinding control jammed
- Descaling does not start automatically
- Descaling process cancelled
- Descaling started inadvertently
- Door difficult to open/close
- Door does not close
- Door does not close (CVA 7xxx)
- Drink dispensed too quickly
- Drip tray cannot be pushed in
- Drip tray overflowing
- Espresso dispensing without cup not cancelled
- Ground coffee next to brew unit
- Grounds container contains lots of water
- Heating phase taking very long
- Heating-up phase/pumps water into drip tray
- Level of liquid in cup varies
- Lighting cannot be switched on
- Lighting switches off suddenly
- Milk container lid comes loose
- Milk froth problems
- Milk not being drawn in (CM 6xxx, CM 7xxx)
- Milk spitting/first milk frothing (Nespresso)
- Milk/milk froth sprays/sputters (CVA 4xxx/CVA 5xxx built-in appliance)
- Milk/milk froth sprays/sputters (CVA 6xxx built-in appliance)
- MilkPerfection does not start (CM 6x60)
- No automatic cleaning and descaling
- No coffee from central spout
- No drink being dispensed
- No rinsing after switch-on but Automatic rinse set
- Rinse constantly displayed/no switch-off
- Steam dispensed; steam heating system switched off
- Too little/too much dispensed
- Too much coffee/coffee overflowing
- Touch display reacts sporadically
- Waste container very full
- Water in waste container
- Water not coming out of spouts
- Water/milk dispensing stops during portion size programming
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual