The nozzle at the top of the door sealing ring is blocked.
Carefully remove the fluff with your finger.
Fault F210 is shown on the washing machine display. There is a fault with the suds circulation system.
Carefully remove the fluff with your finger.
Clean the drain filter and the drain pump:
Switch off the washing machine.
Open the access panel for the drain pump.
Place a suitable container under the access panel, e.g. a universal tray.
Slowly unscrew the drain filters to let the water out.
To interrupt the flow of water, tighten the drain filters back up again.
If water stops flowing out, unscrew the drain filters completely.
Clean the drain filters thoroughly.
Check whether the drain pump impellers can rotate freely. If necessary, remove any foreign objects (e.g. buttons, coins) and clean the interior.
Put the drain filters back in place. Please note that each drain filter must be inserted on the correct side.
Screw the drain filters tight.
Close the access panel for the drain pump.
If the fault persists, please contact us or book a repair appointment online.
The washing machine can still be used but with reduced functionality.