There is a fault.
Switch the steam oven off and then back on again.
Fault F196 (DGC xxx0) is shown on the display of the combination steam oven. Water could not be pumped away from the oven compartment.
Switch the steam oven off and then back on again.
Clean the filter in order to remove soiling from the holes, allowing water to drain again.
Switch the steam oven off.
Insert the filter correctly.
The curve must point upwards; otherwise, it may not be possible for water to flow through the holes at the edge of the filter – see Figure 1 and Figure 2.
Switch the steam oven back on again.
Log your steam oven into your home network with the Miele app.
Perform a software update.
If the fault persists or if you do not want to log your steam oven into the home network, contact the Miele Customer Service Department.