The water intake valve is not fully open.
Open the water intake valve fully and start operation again.
Support for yourSteam Oven
Fault F13
Fault F13 is shown on the display of the steam oven/combination steam oven. The temperature in the oven compartment is too high.
The water nozzle needs descaling or is clogged.
The nozzle must be descaled if the fault message F05 appears on the display.
To descale the nozzle, proceed as follows:
Wait until several buzzer tones sound.
A large amount of hot steam will escape when the door is opened. The food will also be very hot.
Risk of burns
Open the door and remove the food.
Leave the door open to cool down the steam oven.
Remove the side runners.
Pull out the nozzle, see figure.
Descale the nozzle using the Miele system descaling agent.
After descaling, rinse the nozzle under running water.
The steam oven can now be used again as normal.
If the fault persists, please contact us or book a repair appointment online.
For thorough and gentle cleaning of your steam oven, we recommend Miele products which also care for your appliance at the same time.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
