The fan is being blocked by objects in a drawer below the hob, or by dust or similar substances.
Check whether the fan is being blocked by objects in a drawer below the hob, or by dust or similar substances, and remove the blockage accordingly.
Fault FE48 appears on the display of an induction hob cooking zone.
Check whether the fan is being blocked by objects in a drawer below the hob, or by dust or similar substances, and remove the blockage accordingly.
Check that the minimum safety distances for installing the hob, as specified in the operating and installation instructions, have been adhered to.
A safety distance of at least 15 mm must be observed between the bottom edge of the hob and the intermediate shelf or oven.
Once this minimum safety distance has been established, you must disconnect the hob from the mains in order to clear the fault message.
If the fault persists, please contact us or book a repair appointment online.