The hob is not plugged in.
Plug in the hob and switch it on at the socket.
The burner does not ignite when the gas hob is commissioned for the first time or after it has been out of use for a longer period.
Plug in the hob and switch it on at the socket.
Switch on the relevant circuit breaker in the building’s wiring system.
Open the gas safety socket.
Repeat the ignition process several times to get rid of any air in the gas pipe.
Check that the burner parts have been correctly assembled and that the burners are clean and dry.
Make sure that the holes in the burner are dry and free of obstructions. See the operating instructions for more detailed information.
Hobs without electronic ignition: during ignition, please keep the rotary control pressed for approx. 8 seconds, applying a little extra pressure just before you release it.
Change the gas cylinder. New gas cylinders are available from any standard DIY store.
After changing the gas cylinder, check both the cylinder and the gas connections for leaks.