Water in waste container

Clean the brew unit. Proceed as follows:

• Remove the brew unit from the coffee machine.

• Clean the brew unit by hand under warm running water without using cleaning agents.

• Wipe any coffee residues from the filters with your fingers.

• 

• One filter is located in the funnel, see figure. The other filter is to the left of the funnel, see figure.

• Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made.

• Slide the brew unit back into the coffee machine.

Start the Degrease brew unit programme.

See the operating instructions for information on degreasing the brew unit.

Check the seal by running your fingers around it.

In order to remove coffee residues properly from the coffee grinder channel, vacuum out the ground coffee chute once a year with a vacuum cleaner attachment (supplied where applicable).

Clean the ground coffee chute as follows:

• Open the appliance door and remove the ground coffee drawer.

• 

• Attach the vacuum cleaner attachment. Use the suction tube of your vacuum cleaner to vacuum out the ground coffee chute.

• Remove the vacuum cleaner attachment and refit the ground coffee drawer.

• Close the appliance door.

If the fault persists, please contact us or book a repair appointment online.