Support for yourCoffee

Steam instead of milk/milk froth

Steam is coming out instead of milk/milk froth even though the milk container is full.

The suction nozzle on the dispensing unit (Cappuccinatore) has not been inserted into the appliance correctly or has become deformed.

Suction nozzle not inserted correctly | Central spout | Countertop coffee machine

Figure 1: The suction nozzle is not inserted correctly in the central spout. In this position, the suction nozzle draws in external air and cannot supply milk.

Suction nozzle is warped | Central spout | Countertop coffee machine

Figure 2: The intake nozzle has become deformed or warped. As a result, the suction nozzle draws in external air and cannot supply milk.

Disconnect the milk pipework.

The dispensing unit is integrated into the central spout.

Pull the stainless steel cover forwards and remove it from the central spout.

Pull the dispensing unit down to remove it.

Dampen the individual parts of the dispensing unit under running water.

The dispensing unit is easier to reinsert if the individual parts have been dampened with water beforehand.

Suction nozzle inserted correctly | Central spout | Countertop coffee machine

Carefully refit the dispensing unit onto the central spout in the correct position. Press firmly to ensure the dispensing unit is securely fitted without any gaps, see figureĀ 3.

Refit the stainless steel cover.

Connect the milk pipework.

If the fault persists, please contact us or book a repair appointment online.

Operating Instructions finder

Operating Instructions finder

Here you will find the operating instructions for your Miele appliances
Find your manual
Book a technician

Book a technician

We are happy to take your repair booking online or by telephone
Plan a visit
Contact us

Contact us

Visit our Contact us page to see the different ways you can speak to us.
Contact us