Support for yourCoffee

Fit the central spout (built-in appliance)

Insert central spout appears on the coffee machine display even though the central spout is inserted (built-in appliance).

The magnet is missing from the suction nozzle of the central spout.

Suction nozzle magnet | Central spout | Built-in coffee machine

A small magnet has been fitted in the suction nozzle of the central spout, see figure. The magnet might drop out by accident when the central spout is being cleaned.

Open the appliance door.

Pull the stainless steel cover off the central spout.

Detach the milk pipework from the dispensing unit.

Grip the dispensing unit by the sides and pull it down to remove it.

Check for a magnet inside the suction nozzle of the central spout, see figure.

If a magnet has been fitted, reposition it correctly inside the suction nozzle.

Slide the dispensing unit into the coffee machine.

Connect the milk pipework.

Refit the stainless steel cover.

Close the appliance door.

The display shows Fit central spout cover.

Confirm with OK.

If the fault persists, please contact us or book a repair appointment online.

There is a technical problem.

Please contact the Miele Customer Service Department.

Operating Instructions finder

Operating Instructions finder

Here you will find the operating instructions for your Miele appliances
Find your manual
Book a technician

Book a technician

We are happy to take your repair booking online or by telephone
Plan a visit
Contact us

Contact us

Visit our Contact us page to see the different ways you can speak to us.
Contact us